OEM Best Bronze Gate Valve – High-quality Pneumatic Knife Gate Valve – Guangwo Valve
OEM Best Bronze Gate Valve – High-quality Pneumatic Knife Gate Valve – Guangwo Valve Detail:
Single Action Pneumatic Knife Gate Valve
With Limit Switch, Filter, Solenoid Valve 2 knife gate valve body Lug inox CF8M dn 6′’ ASA 150 + Actuator single action with limit switch,Filter,solenoid valve
Applicable Standards
Knife Gate Valve, MSS SP-81
Steel Valves, ASME B16.34
Face to face MSS SP-81
End Flanges EN 1092-1/ASME B16.5/ASMEB16.47
Inspection and test MSS SP-81
Material: CF8M
Size Range: DN50~DN1000
Pressure Rating: ASME CL, 150, PN10,PN16
Temperature Range: 0℃~120℃
Design Description
- Outside Screw and Yoke
- Bolted Bonnet and Pressure Seal
- Flexible and solid wedge, fully guided
- Welding seat rings or Renewable seat rings
- Rising stem and non-rising stem
- Available with gear operator
- Flange Ends & Buttwelding Ends
- Low torque design, smooth surface stem.
Accessories
Accessories such as gear operators, actuators, bypasses, locking devices, chain wheels, extended stems and bonnets for cryogenic service and many others are available to meet the customers’ requirements.
Product detail pictures:
Related Product Guide:
We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for OEM Best Bronze Gate Valve – High-quality Pneumatic Knife Gate Valve – Guangwo Valve , The product will supply to all over the world, such as: Peru, USA, Ukraine, We are in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.
By Abigail from Lesotho - 2017.12.31 14:53
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By May from Paraguay - 2017.01.11 17:15
Related products
-
China High Quality 150lb Ball Valve Factories &...
Product Range Sizes: DN15-DN200（1/2” -8”） Pressure Range: DIN PN16-40 / ANSI 150Lb 300Lb / JIS 10K Temperature :-20℃ ~200℃ (-4℉~392℉) Threaded Selection: BSPP / BSPT / NPT / DIN 2999 – 259 / ISO 228 – 1. Materials WCB、304/CF8, 316/CF8M, 304L/CF3, 304L/CF3M, Duplex Stainless Steel Standard Design & manufacture ANSI B16.34；BS5351;DIN3337 Face-to-face ANSI B16.10;DIN3202 F1,F4/F5;GB/T 12221;JIS B2002 End Connection ANSI B16.5;DIN 2632/2633&DIN 2634/2635;JB/T 79;JIS...
-
China High Quality Special Material Valve Facto...
Single Action Pneumatic Knife Gate Valve With Limit Switch, Filter, Solenoid Valve 2 knife gate valve body Lug inox CF8M dn 6′’ ASA 150 + Actuator single action with limit switch,Filter,solenoid valve Applicable Standards Knife Gate Valve, MSS SP-81 Steel Valves, ASME B16.34 Face to face MSS SP-81 End Flanges EN 1092-1/ASME B16.5/ASMEB16.47 Inspection and test MSS SP-81 Material: CF8M Size Range: DN50~DN1000 Pressure Rating: ASME CL, 150, PN10,PN16 Temperature Range: 0℃~120℃ Design Des...
-
China High Quality Forged Strainer Factories &#...
The opening and closing component of the knife gate valve is a door, and the direction of fluid movement perpendicular to the direction of the door, the knife gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. Mainly used in the field of paper, slurry, mining, ect. CNGW also supply the gate valves as below Pneumatic Knife Gate Valve Manual Slurry Valve Sprocket Knife Gate Valve Electric Knife Gate Valve Dark Rod Pneumatic Knife Gate Valve Conceal...
-
ODM High Performance Butterfly Valve Factory &#...
Applicable Standards Butterfly valve design according to API609, ASME B16.34 Face to face ASME B16.10/API609 End Flanges ASME B16.5/ASME B16.47 Butt Welding ends ASME B16.25 Inspection and test API 598 Material: LCB Size Range: 2- 56″ Pressure Rating: ASME CL 150,300 Temperature Range: -29°C~425°C Design Description - Low friction between seat and disc of valve - “Zero Leakage” Sealing Design - Standard Laminated Resilient Disc Seal to 800°F (427°C) - One Piece Shaft - Low torque enable...
-
ODM 800lb Check Valve Suppliers – API 6...
Product Range Sizes: NPS 1/2 to NPS 24 (DN15 to DN600) Pressure Range: Class150 to Class 2500 End connection: RF, RTJ Materials Casting (A216 WCB, WC6, WC9, A350 LCB, A351 CF8, CF8M, CF3, CF3M, A995 4A, A995 5A, A995 6A), Alloy 20, Monel, Inconel, Hastelloy Standard Design & manufacture API 6D, API 594 Face-to-face API 594, ASME B16.10 End Connection Flange Ends to ASME B16.5, ASME B16.47, MSS SP-44 (NPS 22 Only) - Socket Weld Ends to ASME B16.11 - Butt Weld Ends to ASME B1...
-
Ansi Y Type Strainer Products – Tempora...
Temporary Strainers are designed in cone ,basket,or plate shape. The temporary strainers are a effective mean for temporary straining for start-up applications.Fabricated temporary cone,basket,or plate strainers are designed for initial start-up and should not be used as a Permanent straining solution. The main characteristics of tapered temporary filter and the applicable scope Temporary filter/cone filter/cone bottom tip cone temporary filter/filter/flat conical filter/flat flat filter/stai...
