ODM Dual Plate Wafer Check Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve
ODM Dual Plate Wafer Check Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve Detail:
ANSI＆DIN Knife Gate Valve
Applicable Standards
Knife Gate Valve, MSS SP-81
Steel Valves, ASME B16.34
Face to face MSS SP-81
End Flanges EN 1092-1/ASME B16.5/ASMEB16.47
Inspection and test MSS SP-81
Material: cast steel, stainless steel, special alloy, CI, DI etc
Size Range: DN50~DN1000
Pressure Rating: ASME CL, 150, PN10,PN16
Temperature Range: 0℃~120℃
MATERIALS:
Casting: (GGG40, GGG50, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy,UB6
Design Features:
Knife Gate Valve which makes it one of the best abrasive resistant materials. Our Knife Gate Valve is full lined with high quality urethane, which far exceeds the wear-life of gum rubber and any other softer liner, or sleeve materials.
1.Zero leakage. Full lined urethane valve body and molded elastomer gate seal prevents leakage permanently both the valve sealing and the valve body itself during working.
2.Extended wear-life. High quality abrasive resistant urethane liners, and robust stainless knife gates as well as the unique design of the valve itself provide an extremely long service life.
3.Bi-directional shut-off. When back flow happens NSW can be used as a preventer as well.
4.Self-flushing design. During valve closing the beveled knife gate redirects flowing slurry towards the beveled urethane liner seat, develops turbulence and intensifies the flow then flushes the slurry out of the bottom of the urethane as the gate settles into the seat.
5.Convenient rebuilds. When finally rebuilds are necessary, the wear-parts (urethanes, gate seals, knife gates) can all be replaced in field. Valve bodies and other parts are reusable.
Options
1.Liners. Varieties of urethanes are available.
2.Gates. SS304 gates with hard chromium coated are standard. Other alloys are available (SS316, 410, 416, 17-4PH…) Optional gate coatings are also available.
3.PN10, PN16, PN25, 150LB, are available.
4.Optional actuators are available.
Product detail pictures:
Related Product Guide:
The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for ODM Dual Plate Wafer Check Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve , The product will supply to all over the world, such as: Angola, luzern, Surabaya, We welcome customers from all over the world come to discuss business. We supply high quality solutions, reasonable prices and good services. We hope to sincerely build business relationships with customers from at home and abroad, jointly striving for a resplendent tomorrow.
By Georgia from Japan - 2018.02.04 14:13
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
By Sandy from United Kingdom - 2018.06.09 12:42
Related products
-
China High Quality Pressure Seal Bonnet Forged ...
API 600 OS&Y Gate Valve Size Range and Pressure Class Size Range: 2″~48″ Pressure Rating: ASME CL, 150, 300, 600, 900, 1500, 2500 Design Standards Design / Manufacture as per the standards API 600 Face to Face Length (Dimension) as per the standards ASME B16.10 Flanged Dimension according to the standards ASME B16.5 Flanged to ASME B16.5 (2” ~ 24”) and ASME B16.47 Series A / B (26” and above) Clamp / Hub ends on request. Testing according to the standards API 598 Technical Fea...
-
OEM Best Pneumatic Knife Gate Valve Products &#...
The opening and closing component of the knife gate valve is a door, and the direction of fluid movement perpendicular to the direction of the door, the knife gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. Mainly used in the field of paper, slurry, mining, ect. CNGW also supply the gate valves as below Pneumatic Knife Gate Valve Manual Slurry Valve Sprocket Knife Gate Valve Electric Knife Gate Valve Dark Rod Pneumatic Knife Gate Valve Conceal...
-
ODM 2000 Wog Ball Valve Factory – DIN F...
Applicable Standards Ball Valve design according to API6D,BS5351,ASME B16.34 Face to face ASME B16.10,AP6D End Flanges ASME B16.5/ASME B16.47 Butt welded ends ASME B16.25 Fire Safety API607,API6A Inspection and test API 598,API6D Material: A105，WCB,CF8,CF8M,GP240GH etc. Size Range: 1/2″~8″ Pressure Rating: ASME CL, 150, 300, 600,PN10-PN40 Temperature Range: -196°C~600°C Design Description - Two Pieces or Three Pieces Body - Metal or Soft Seated - Full or Reduced Bore - Flanged...
-
ODM C12a Check Valve Supplier – DIN Hea...
Heavy hammer check valve Key works: Heavy, hammer, check, valve, swing, BS1868, API6D, FLANGE, CF8, CF8M, WCB Product Range Sizes: NPS 2 to NPS 28 Pressure Range: Class 150 to Class 2500 Flange Connection: RF, FF, RTJ Materials Forged (A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5,) Casting (A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy Standard Design & manufacture API 6D / BS 1868 Face-to-face ASME B16.10 End C...
-
OEM Best Wedge Gate Valve Manufacturers –...
4A OS&Y 10” 300LB Gate Valve 4A OS&Y 10” 300LB Gate Valve,Body Material:4A,Connection: RF Flanged,Operation: Hand wheel,API 600,Cast Steel Valve,Face to face ASME B16.10 API600 gate valves usually adopt a wedge-type gate, or a solid or flexible wedge-type gate structure. The gate should be completely withdrawn from the valve seat hole when in the open position, except the parallel double-disc gate. GW also produce the valves as below, API 600 OS&Y Gate Valve, API 600 W...
-
ODM Gear Globe Valve Supplier – API 602...
Product Range Sizes: NPS 1/2 to NPS2 (DN15 to DN50) Pressure Range: Class 800, Class 150 to Class 2500 Materials Forged (A105, A350 LF2, A182 F5, F11, F22, A182 F304 (L), F316 (L), F347, F321, F51), Alloy 20, Monel, Inconel, Hastelloy Standard Design & manufacture API 602,ASME B16.34,BS 5352 Face-to-face MFG’S End Connection - Flange Ends to ASME B16.5 - Socket Weld Ends to ASME B16.11 - Butt Weld Ends to ASME B16.25 - Screwed Ends to ANSI/ASME B1.20.1 Test & inspect...
