ODM Angle Globe Valve Suppliers – -196℃ Cryogenic Globe Valve – Guangwo Valve
ODM Angle Globe Valve Suppliers – -196℃ Cryogenic Globe Valve – Guangwo Valve Detail:
Applicable Standards
Globe valve, BS1873
Steel valve, ASME B16.34
Face to face ASME B16.10
End Flanges ASME B16.5/ASME B16.47
Butt welding ends ASME B16.25
Inspection and test API 598S
Material: SS
Size Range: 2’’~24’’
Pressure Rating: ASME CL, 150,300,600,900,1500,2500
Temperature Range: -196°C~600°C
Design Description
- Outside Screw and Yoke
- Bolted Bonnet and Pressure Seal
- Rising stem and non-rising stem
- Available with gear operator
- Flange Ends and Buttwelding Ends
- Different type of disc availiable
- Low torque design, smooth surface stem.
Application & Function
GW Cast steel globe valve is used for throttling flow control. Shut off is accomplished by moving the disc against the flow stream rather than across it as in the case with a gate valve. The flow pattern through a globe valve involves changes in direction, resulting in greater resistance to flow, causing high pressure drop. Didtek Cast steel Globe valve is an excellent valve to use for on-off service, also is highly suited for frequent cycling and control of fluids anywhere in amount or volume between the open and closed positions.
Didtek Cast steel globe valve must be installed in the proper relation to the media flow as indicated by the flow direction arrow marked on the valve body. This valve is considered uni-directional and must be installed with the pressure side or inlet under the seat.
Accessories
Accessories such as gear operators, actuators, bypasses,locking devices, chain wheels, extended stems and bonnets for cryogenic service and many others are available to meet the customers’ requirements.
Hot Tags: Cryogenic Globe Valve, China, manufacturers, suppliers, factory, cheap, pricelist, low price, in stock, for sale, Triple Eccentric Butterfly Valve, Stainless Steel Knife Gate Valve, PTFE Sleeved Plug Valve, Unidirectional Ball Valve, Threaded Ball Valve, Wafer Ball Valve
Product detail pictures:
Related Product Guide:
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for ODM Angle Globe Valve Suppliers – -196℃ Cryogenic Globe Valve – Guangwo Valve , The product will supply to all over the world, such as: Lisbon, Congo, Ecuador, We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we have better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We are always here working for your demands whenever you need.
By Diana from Nigeria - 2017.02.18 15:54
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Gemma from Jersey - 2017.10.25 15:53
Related products
-
ODM Cs Check Valve Supplier – DIN Swin...
DIN Swing Check Valve DIN swing check valve is used to prevent back flow in the line. Flow is in a straight line through the valve resulting in minimal pressure drop. Applicable Standards Design BS EN1868 Face to face EN 558-1 End Flanges EN 1092-1 Butt Welding ends EN 12627 Inspection and test EN 12266-1 Material: GS-G25，GP240GH,1.0619,1.4408,1.4308,1.7315 etc. Size Range: DN40~DN700 Pressure Rating: PN16~PN100 Temperature Range: -50°C~650°C Design Description - Bolted Bonnet and Pressure...
-
Cryogenic Globe Valve Factories – API＆...
The opening and closing component of the knife gate valve is a door, and the direction of fluid movement perpendicular to the direction of the door, the knife gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. Mainly used in the field of paper, slurry, mining, ect. CNGW also supply the gate valves as below Pneumatic Knife Gate Valve Manual Slurry Valve Sprocket Knife Gate Valve Electric Knife Gate Valve Dark Rod Pneumatic Knife Gate Valve Conceal...
-
China High Quality Psb Globe Valve Factories &...
Applicable Standards Globe valve, BS1873, API 623 Steel valve, ASME B16.34 Face to face ASME B16.10 End Flanges ASME B16.5/ASME B16.47 Butt welding ends ASME B16.25 Inspection and test API 598 Material: WCB, WCC, LCB, LCC, LC1, LC2, LC3, CF8, CF3, CF8M, CF3M, CF8C, CN7M, CA15, C5, WC6, WC9, C12,C12A,C95800,C95400,Monel,4A,5A,6A etc. Size Range: 2’’~24’’ Pressure Rating: ASME CL, 150,300,600,900,1500,2500 Temperature Range: -196°C~600°C Design Description - Outside Screw and Yoke - Bolted Bonn...
-
OEM Best 300lb Ball Valve – API 6D Floa...
Product Range Sizes: NPS 2 to NPS 60 Pressure Range: Class 150 to Class 2500 Flange Connection: RF, FF, RTJ Materials Casting: (A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy,UB6 Forged (A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5,) Standard Design & manufacture API 6D,ASME B16.34 Face-to-face ASME B16.10,EN 558-1 End Connection ASME B16.5, ASME B16.47, MSS SP-44 (NPS 22 Only) - Socket Weld Ends to ASME B16.1...
-
OEM Best Pn6 Gate Valve Exporters – 1.4...
1.4408 DIN Gate Valve PN16 Applicable Standards Design EN 1984 Face to face EN 558-1 End Flanges EN 1092-1 Butt Welding ends EN 12627 Inspection and test EN 12266-1 Material: 1.4408 Size Range: DN32~DN1200 Pressure Rating: PN10~PN160 Temperature Range: -196°C~650°C Design Description - Outside Screw and York - Bolted Bonnet and Pressure Seal - Flexible wedge, fully guided - Seat in stellite or 13%Cr - Rising stem and non-rising stem - Available with gear operator - Flange Ends - Butt-weldin...
-
ODM 904l Gate Valve Suppliers – API 600...
API 600 OS&Y Gate Valve Size Range and Pressure Class Size Range: 2″~48″ Pressure Rating: ASME CL, 150, 300, 600, 900, 1500, 2500 Design Standards Design / Manufacture as per the standards API 600 Face to Face Length (Dimension) as per the standards ASME B16.10 Flanged Dimension according to the standards ASME B16.5 Flanged to ASME B16.5 (2” ~ 24”) and ASME B16.47 Series A / B (26” and above) Clamp / Hub ends on request. Testing according to the standards API 598 Technical Fea...
