China High Quality 150lb Check Valve Supplier – API 594 Wafer, Lug and Flanged Check Valve – Guangwo Valve
China High Quality 150lb Check Valve Supplier – API 594 Wafer, Lug and Flanged Check Valve – Guangwo Valve Detail:
Product Range
Sizes: NPS 2 to NPS 48
Pressure Range: Class 150 to Class 2500
End Connection: Wafer, RF, FF, RTJ
Materials
Casting: Cast Iron, Ductile Iron, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2, Monel, Inconel, Hastelloy,UB6, Bronze, C95800
Standard
| Design & manufacture | API594 |
| Face-to-face | ASME B16.10,EN 558-1 |
| End Connection | ASME B16.5, ASME B16.47, MSS SP-44 (NPS 22 Only) |
| Test & inspection | API 598 |
| Fire safe design | / |
| Also available per | NACE MR-0175, NACE MR-0103, ISO 15848 |
| Other | PMI, UT, RT, PT, MT |
Design Features
1. Dual Plate or Single Plate
2. Wafer, Lug and Flanged
3. Retainless and Retain
API 594 Dual plate check valve is used for pure pipelines and industrial, environmental protection, water treatment, water supply and drainage pipelines in high-rise buildings to prevent the reverse flow of media. The check valve adopts a wafer type, the butterfly plate is two semicircles, and adopts a spring to force the reset, the sealing surface can be the body surfacing welding wear-resistant material or rubber lining, the use range is wide, and the sealing is reliable.
The opening and closing parts of API 594 check valve rely on the flow and force of the medium to open or close by themselves to prevent the medium from flowing back. The valve is called the check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents.
According to the structure of the check valve, it can be divided into three types: lift check valve, swing check valve and wafer check valve. Lift check valves can be divided into two types: vertical and horizontal. Swing check valves are divided into three types: single valve, double valve and multi valve. The wafer check valve is a straight-through type. A check valve is a valve that can automatically prevent fluid from flowing back. The valve flap of the check valve opens under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, gravity and other factors to prevent the fluid from flowing back.
If you need more details about valves please contact our sales department
Product detail pictures:
Related Product Guide:
Our business aims to operating faithfully, serving to all of our clients , and working in new technology and new machine continuously for China High Quality 150lb Check Valve Supplier – API 594 Wafer, Lug and Flanged Check Valve – Guangwo Valve , The product will supply to all over the world, such as: Puerto Rico, Nepal, Jeddah, We have now a good reputation for stable quality goods, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
By Megan from Eindhoven - 2018.04.25 16:46
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Rosemary from Netherlands - 2018.06.09 12:42
Related products
-
ODM Cn7m Globe Valve Suppliers – BS187...
Applicable Standards Globe valve, BS1873, API 623 Steel valve, ASME B16.34 Face to face ASME B16.10 End Flanges ASME B16.5/ASME B16.47 Butt welding ends ASME B16.25 Inspection and test API 598 Material: WCB, WCC, LCB, LCC, LC1, LC2, LC3, CF8, CF3, CF8M, CF3M, CF8C, CN7M, CA15, C5, WC6, WC9, C12,C12A,C95800,C95400,Monel,4A,5A,6A etc. Size Range: 2’’~24’’ Pressure Rating: ASME CL, 150,300,600,900,1500,2500 Temperature Range: -196°C~600°C Design Description - Outside Screw and Yoke - Bolted Bonn...
-
OEM Best F4 Din Gate Valve Factories – ...
Applicable Standards Gate Valve, API600 Steel Valves, ASME B16.34 Face to face ASME B16.10 End Flanges ASME B16.5 Butt Welding ends ASME B16.25 Inspection and test API 598 Material: WC6 Size Range: 2″~16″ Pressure Rating: ASME CL 900, 1500, 2500 Temperature Range: -29℃~538℃ Solid Wedge Gate Valve is manufactured with solid wedge, which has higher strength. Because the wedge is solid, when working, there will be less de-formation happing to the gate, it will have to depend on the s...
-
OEM Best Cs Check Valve Exporters – AP...
Product Range Sizes: NPS 2 to NPS 48 Pressure Range: Class 150 to Class 2500 End Connection: Wafer, RF, FF, RTJ Materials Casting: Cast Iron, Ductile Iron, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2, Monel, Inconel, Hastelloy,UB6, Bronze, C95800 Standard Design & manufacture API594 Face-to-face ASME B16.10,EN 558-1 End Connection ASME B16.5, ASME B16.47, MSS SP-44 (NPS 22 Only) Test & inspection API 598 Fire safe design / Also available per NACE ...
-
OEM Best Cs Check Valve Factory – BS18...
GW BS1868 Swing Check Valve BS1868 swing check valve prevents potentially damaging backflows to protect equipment like as pumps and compressors. The Non-return valves allow the flow of the fluid in one direction only and block reverse flows. It has the simplest design and operates via a metallic disc attached to a hinge at the top. when the fluid passes through a the swing check valve, then the valve is open. When a reverse flow occurs, the changes in motion as well as gravity help to close t...
-
OEM Best Bronze Check Valve Manufacturer –...
ANSI＆DIN Knife Gate Valve Applicable Standards Knife Gate Valve, MSS SP-81 Steel Valves, ASME B16.34 Face to face MSS SP-81 End Flanges EN 1092-1/ASME B16.5/ASMEB16.47 Inspection and test MSS SP-81 Material: cast steel, stainless steel, special alloy, CI, DI etc Size Range: DN50~DN1000 Pressure Rating: ASME CL, 150, PN10,PN16 Temperature Range: 0℃~120℃ MATERIALS: Casting: (GGG40, GGG50, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy,UB6 Desi...
-
China High Quality 2500lb Gate Valve Manufactur...
Size Range and Pressure Class Size from 1/2” to 4” (DN15-DN100) Pressure from 150LBS to 1500LBS (PN16-PN240) Design Standards Design / Manufacture as per the standards API 6D; ASME B16.34; DIN 3357; EN 13709; GB/T12237; BS5351 Face to Face Length (Dimension) as per the standards ASME B16.10; EN 558-1 Gr. 14 (DIN 3202-F4); DIN 3202-F5; DIN 3202-F7; BS5163 Flanged Dimension according to the standards ASME B16.5; EN 1092-1; BS4504; DIN2501; Flanged to ASME B16.5 (2” ~ 24”) and ASME B16.47 Series...
